In Floor Valve Parts

Keep Every Zone Running: Shop Pool In-Floor Valve Parts and Replacements

Every in-floor cleaning system depends on one mechanical hub to direct pressurized water across the pool floor. When that hub needs attention, the right pool in-floor valve parts make the difference between a quick fix and a full system replacement. 

The valve assembly, including the cam, housing, gear kit, T-valve, and seals, is the engine of your in-floor pool cleaning system, cycling through ports sequentially to push debris toward the main drain zone by zone.

At Fresh Pool Supply, we stock genuine OEM pool valve parts for the industry’s leading in-floor brands like A&A Manufacturing, Caretaker, Paramount, and Blue Square, covering everything from individual cams and O-rings to complete rebuild kits. Moreover, we ship all orders over $49.99 nationwide for free.

Precision Parts for Every Port: A&A In-Floor Valve Parts

A&A Manufacturing is one of the most widely installed in-floor systems in the residential market, and our A&A in-floor valve parts range covers the full spectrum of repair and replacement needs. Key components include:

• T-Valve Kits: 5-port top feed (1-1/2") and 6-port low profile T-valve kits for both glue-in and press-in configurations.

• Ball Valve Kits: 5-port and 6-port top feed ball valve kits for complete valve mechanism replacement.

• Lower Housings: 5-port top feed and 6-port top feed lower housings for structural valve repairs.

• Cams and Gear Kits: 5-port bottom cam, 6-port ball valve cam, and 5 & 6 port top feed gear kits for sequencing repairs.

• Retro Kits: 5-port and 6-port retro kits for pool in-floor cleaning system parts upgrades on ageing A&A installations.

• Band Clamps and Anti-Friction Washers: Stainless band clamps, clamp knobs, and anti-friction washers for seal integrity.

Rebuild with Confidence: Caretaker In-Floor Valve Parts

The Caretaker 99 system is a staple of residential in-ground pools, and genuine Caretaker in-floor valve parts ensure correct cam sequencing and a watertight seal on every cycle. Our product range includes:

• Rebuild Kits: The Caretaker 99 Water Valve Rebuild Kit covers the major wear components for a full system restore; the Caretaker 99 rebuild kit is the single most cost-effective repair solution for a degraded valve assembly.

• Top Housings: Caretaker 99 top housing with threaded union adapter (1.5") and Caretaker 5-port top housing with threaded union for housing-level replacements.

• Bottom Plates: Caretaker 99 bottom plate (1.5" outlets) and Caretaker 5-port bottom plate (2" outlets) for outlet-side repairs.

• UltraFlex 2 Components: O-ring kit with molded tee and top plate valve assembly for in-floor pool cleaner parts specific to UltraFlex 2 installations.

• O-Ring & Union Kits: Caretaker O-ring kit and union assembly for seal replacements without a full rebuild.

Ultimate Flow: Paramount In-Floor Valve Parts

The Paramount PCC 2000, Pool Valet, and PV3 systems are engineered for high-efficiency cleaning, and genuine Paramount swimming pool valve parts keep these advanced water-driven modules operating at peak pressure. Our product range includes:

• Water Valve Modules: Current-generation 2-port, 4-port, and 6-port replacement modules for quick drop-in sequencing overhauls.

• Housings and Bases: Heavy-duty valve bases, modern dome tops, and specialized base extensions for structural valve repairs.

• Internal Hardware: Authentic retro-fit gear assemblies, replacement pawls, and tune-up components to restore proper timing cycles.

• Clamps and Seals: Updated band clamp assemblies, high-tolerance lid O-rings, and perimeter gaskets to secure watertight system integrity.

Maximize Pressure: Blue Square In-Floor Valve Parts

The Blue Square Q360 system relies on precise pressure intervals to clear debris, and matching exact Blue Square Q360 parts is critical to maintaining optimized flow rates across all zones. Our inventory includes:

• Rebuild Kits: Complete Q360 water valve rebuild kits to fully overhaul worn internal mechanisms in a single service.

• Lids and Assemblies: Q360 valve lids with pre-installed O-rings for fast, secure housing-level replacements.

• Seals and O-Rings: High-tolerance lid O-rings and valve body seals designed to prevent pressure loss.

• Retention Hardware: Stainless steel band clamps with matching tension nuts to ensure safe housing containment under pressure.

Find the Right Part First Time: How to Identify Your In-Floor Valve Parts

Getting the right in-floor pool cleaning system parts starts with three steps:

If you need support identifying the correct pool valve parts for your system, contact Fresh Pool Supply directly. Our team can match parts to your system from a model number or photo. Also browse our in-floor valves, cleaning heads, tools, and debris canister parts for complete in-floor system support.

Why Buy In-Floor Valve Parts From Fresh Pool Supply

• Genuine OEM Only: Every in-floor pool cleaner part we stock is an authentic, manufacturer-warranted component from A&A, Caretaker, Paramount, or Blue Square, no aftermarket substitutes.

• Complete System Coverage: From pool in-floor cleaning system parts to cleaning heads and in-floor tools, everything your system needs is in one place.

• Free Nationwide Shipping: All orders over $49.99 ship free; residential and commercial accounts welcome.

• 20+ Years of Pool Expertise: Our Henderson, NV team serves homeowners and pool service professionals across the nation; contact us for parts identification support before ordering.

• Earn Splash Points: Every purchase automatically earns rewards toward your next order.

Frequently Asked Questions

1. What are in-floor valve parts? 

In-floor valve parts are the individual replacement components that make up the valve assembly in a pool in-floor cleaning system, including cams, housings, gear kits, T-valve assemblies, band clamps, O-ring kits, and full rebuild kits. These pool valve parts work together to distribute pressurized water sequentially to in-floor cleaning heads, sweeping debris toward the main drain.

2. How do I know which in-floor valve parts I need? 

Start by identifying your in-floor pool system brand: A&A Manufacturing, Caretaker, Paramount, or Blue Square, normally printed on the valve body lid or found in your original installation documentation. Next, identify your valve's port count (5-port or 6-port), which determines the correct cam, T-valve assembly, and housing. Contact Fresh Pool Supply if you need help identifying the right pool in-floor valve parts for your system.

3. Are A&A and Caretaker in-floor valve parts interchangeable? 

No. A&A, Caretaker, Paramount, and Blue Square all use proprietary valve architectures. Swimming pool valve parts are brand-specific and not interchangeable across systems. Always match replacement parts to your system's exact brand and model, using mismatched parts can cause pressure loss, cam sequencing failure, or seal damage.

4. Do in-floor valve parts come with a warranty? 

Yes. A&A, Caretaker, Paramount, and Blue Square all offer manufacturer warranties on genuine OEM replacement parts. Fresh Pool Supply stocks only genuine OEM pool in-floor cleaning system parts, not aftermarket substitutes, ensuring you receive full manufacturer warranty coverage.

5. Where can I find cleaning heads and tools to go with my valve parts? 

Fresh Pool Supply stocks a full range of in-floor cleaning heads compatible with A&A, Caretaker, Paramount, and Blue Square systems, as well as specialized in-floor system tools for valve servicing and head replacement.